JigFoundry Workshop Cut Sheet
Project: Cabinet Fabrication Engine & Cut List Optimizer | Generated: Oct 14, 2026, 09:43 PM
From cabinet opening to cut-ready parts.
Size drawers, doors, carcasses, and full sheets with real hardware clearances, actual material thicknesses, and fabrication exports.
1. Opening & Slide
Opening (LW, LH, LT)2. Material Sizing
Nominal vs. Actual3. Shop Joinery
Assembly MethodInside cabinet depth is 558.8mm, but Blum TANDEM plus BLUMOTION 563H / 569H (Sides up to 16mm / 5/8") recommends at least 559.0mm for rear mounting sockets and runner overhang.
Interactive Technical SVG Blueprint
Live 60fps Vector MathMaster Cut List is Empty
Configure drawer dimensions, Shaker doors, or cabinet carcasses above, then click "Add to Cut List" to build your workshop project.
Undermount & Side-Mount Hardware Specification & Deduction Registry
All formulas are extracted from official manufacturer installation guides. Never estimate drawer slide deductions.
| Hardware Series | Allowed Side Thickness (Ts) | Deduction Formula | Min Vertical Clearance | Rear Notch Width | Load Rating | Provenance Status |
|---|---|---|---|---|---|---|
| Blum TANDEM plus BLUMOTION 563H / 569H (Sides up to 16mm / 5/8") Blum • TANDEM 563H/569H | 11.0mm – 16.0mm (0.433" – 0.630") | IDW = LW - 42.0mm (1.654" deduction) | 20.0mm (0.787") | 35mm (1-3/8") | 100 lbs | VERIFIED_SPEC |
| Blum TANDEM plus BLUMOTION 563F / 569F (Sides 16mm–19mm / 5/8"–3/4") Blum • TANDEM 563F/569F | 16.0mm – 19.1mm (0.630" – 0.750") | IDW = LW - 49.0mm (1.929" deduction) | 20.0mm (0.787") | 39mm (1-3/8") | 100 lbs | VERIFIED_SPEC |
| Blum MOVENTO 760H / 766H (Sides up to 16mm / 5/8", 4-Way / 6-Way Adjustment) Blum • MOVENTO 760H/766H | 11.0mm – 16.0mm (0.433" – 0.630") | IDW = LW - 42.0mm (1.654" deduction) | 21.0mm (0.827") | 35mm (1-3/8") | 88 lbs | VERIFIED_SPEC |
| Grass Dynapro Soft-close (Sides up to 16mm / 5/8") Grass • Dynapro 2D/3D | 11.0mm – 16.0mm (0.433" – 0.630") | IDW = LW - 42.0mm (1.654" deduction) | 21.0mm (0.827") | 35mm (1-3/8") | 88 lbs | VERIFIED_SPEC |
| Standard 1/2" Side-Mount Ball-Bearing Slides (Accuride 3832 / KV 8400) Standard / Accuride / Knape & Vogt • 3832 / 8400 Series | 9.5mm – 20.0mm (0.374" – 0.787") | ODW = LW - 25.4mm (1.000" total deduction) | 12.7mm (0.500") | N/A (Side Mount) | 100 lbs | STANDARD_INDUSTRY_PRESET |
| Custom Undermount Profile (Configurable Clearances) User Custom • Generic Undermount | 11.0mm – 16.0mm (0.433" – 0.630") | IDW = LW - 42.0mm (1.654" deduction) | 21.0mm (0.827") | 35mm (1-3/8") | 100 lbs | REQUIRES_USER_SPEC_CONFIRMATION |
Nominal vs. Actual Plywood Thickness Reference Chart
Why drawer boxes jam: nominal 1/2" plywood is NOT 0.500" (12.7mm). Imported Baltic Birch is 12.0mm (0.472") and domestic 3/4" is 23/32" (18.26mm).
| Material Grade & Specification | Nominal Trade Size | Actual Thickness (mm) | Actual Thickness (in) | Tolerance Delta from Nominal | Primary Shop Application |
|---|---|---|---|---|---|
| 12mm Baltic Birch (Nominal 1/2") | 1/2" (12.7mm) | 12.00 mm | 0.4724" | -0.028" (0.70mm) | GOST 3916.1-96 Birch Plywood Standard / Common Cabinet Grade Import Thickness |
| 15mm Baltic Birch (Nominal 5/8") | 5/8" (15.88mm) | 15.00 mm | 0.5906" | -0.034" (0.87mm) | GOST 3916.1-96 Birch Plywood Standard / European 11-ply Birch |
| 18mm Baltic Birch (Nominal 3/4") | 3/4" (19.05mm) | 18.00 mm | 0.7087" | -0.041" (1.05mm) | GOST 3916.1-96 Birch Plywood Standard / European 13-ply Birch |
| Domestic 1/2" Sanded Plywood (15/32") | 1/2" (0.500") | 11.91 mm | 0.4688" | -0.031" (0.79mm) | ANSI/HPVA HP-1-2020 American National Standard for Hardwood Plywood (15/32" Category) |
| Domestic 3/4" Hardwood Plywood (23/32") | 3/4" (0.750") | 18.26 mm | 0.7188" | -0.031" (0.79mm) | ANSI/HPVA HP-1-2020 Hardwood Plywood Standard (23/32" Category) |
| 3/4" MDF / Particle Board / Melamine | 3/4" (0.750") | 19.05 mm | 0.7500" | -0.000" (0.00mm) | ANSI A208.2 MDF Standards (Standard Calibrated Core) |
| 1/4" Undersized Plywood Bottom / Panel (7/32") | 1/4" (0.250") | 5.56 mm | 0.2188" | -0.031" (0.79mm) | Standard 5.2mm-5.5mm 1/4" Import & Domestic Underlayment / Backer Plywood |
| 1/4" True Thickness MDF / Baltic Birch Bottom (6.0-6.35mm) | 1/4" (0.250") | 6.35 mm | 0.2500" | +0.000" (0.00mm) | True 1/4" Calibrated MDF or 6mm Baltic Birch |
| 3/4" Solid Hardwood (S4S Sized) | 3/4" (0.750") | 19.05 mm | 0.7500" | -0.000" (0.00mm) | NHLA S4S Standard 4/4 Planed Surfaced Four Sides Lumber |
| 5/8" Solid Hardwood (Drawer Sides) | 5/8" (0.625") | 15.88 mm | 0.6250" | +0.000" (0.00mm) | Custom Shop Planed 5/8" Maple / Beech Drawer Stock |
| 1/2" Solid Hardwood (Drawer Sides) | 1/2" (0.500") | 12.70 mm | 0.5000" | +0.000" (0.00mm) | Custom Shop Planed 1/2" Maple / Beech Drawer Stock |
Frequently Asked Fabrication Questions
How does JigFoundry handle nominal vs actual plywood thicknesses?
Nominal plywood sizes can differ from measured thickness. JigFoundry includes common 12.0mm Baltic Birch and 23/32" (18.26mm) domestic hardwood-plywood presets and allows direct caliper overrides. Always measure the actual sheet and verify the generated dimensions before cutting.
How do I print 1:1 scale drilling jigs without scaling distortion?
Click "Print 1:1 Drilling Jig", choose your template, and in your browser print dialog set Scale to "100%" or "Actual Size" (never "Fit to Page"). Verify the printed physical ruler calibration box with a steel scale before drilling.
Are there calculation limits, paywalls, or account login requirements?
No. JigFoundry is free to use without an account or daily calculation limits, and its available .SVG and .DXF downloads are not gated.